TL-UV40PRO UV Germicidal Light

The Details Related Solution Related Cases Related Video Download

Ultraviolet Lamp, this is the new product for ITC audiovisual & lighting system system company. It is effectively to kill the bacteria and sterilize.



null

null

null



Specifications

Name UV GERMICIDAL LIGHT
Input voltage
220V±10% AC,50/60Hz
Rated power
40W
Light source specifications
OSRAM UV light 36W
Light lifespan
9000 hours
Power factor
/ PF> 0.9
Supply current
0.19A
Output current (light current)
430 mA
Ballast
Specially developed UV electronic ballast
Initial -UVC Irradiance
1.4 W / m² @ 1M
THD
<20%
Infrared induction protection device
Start delay is 30 seconds; if someone (or animal) is detected to accidentally break in, it will immediately turn off the light; coverage area 80-150 square meters
30 minutes germicidal rate
99.7%
Weight
1.5kg
Size
1363 * 54 * 78mm
Operating temperature
-10 ℃ ~ 35 ℃
Storage temperature
-20 ℃ ~ 60 ℃



Applicable scenarios

Home hospitals schools factories stations offices cinemas restaurants gyms bars small venues.



Installation instructions

null
null

Loosen the cover fastening screws

and remove the cover

Take out the light holder in the housing

and put it into the slot at both ends of the housing

null
null

Drill holes in the intended installation position

and embed M4 screw plastic expansion tube (customer-supplied)

Install the cover on the housing

and fix the cover with fastening screws

null
null
null
The power cord is fixed in the terminal


The ground wire plug on the cover is in the housing


Install the cover on the housing and fix the cover with fastening screws

null
null
Install the ultraviolet light source into the light holder according to the direction shown in the figure, and then rotate it by 90 ° to fix it



Features

Efficient:


Due to the characteristics of the ultraviolet light source, it is hoped that it can achieve the best germicidal effect in as short a time as possible after power on. It is required to release a large amount of effective bactericidal dose in a short time, quickly kill the bacteria, and have a long lifespan for less replacement and maintenance.



Smart:

Turn on at regular time, and turn off automatically at the setting germicidal time. If there is any fault, it can be automatically fed back to the control center. Support remote control via smart terminals (computer / mobile).



Safe:


- Product electrical performance safety; Installation and maintenance personnel (engineering personnel)

- Prevent intrusion by mistake; Daily maintenance staff (teacher / administrator)

- No harmful by-products; Beneficiaries (students)



Advantage comparison:


× Light source has ozone, short lifespan and poor efficiency
√ Use OSRAM ozone-free high-efficiency UV light source
× Ballasts do not match or are obsolete
√ Use professional UV ballasts to fully fit UV light source
× Poor light quality--easily deformed
√ Osram lights are in line with national indicators
× People will be irradiated by UV when the UV light is turned on and off indoors
√ Delay 30 seconds to start, people can leave calmly after turning on the lights
× Risk of sunburn when someone accidentally breaks into
√ Osram system with infrared motion sensing device will turn off the lights in time when someone is detected
× Sunburn risk of accidentally turning on the light
√ Osram system with motion sensing device will turn off the lights in time when someone is detected




For more UV Light details pls check the attachment on right→

For more details for other products pls check: www.itctech.com.cn